Product Categories
- Clip Ons & Handlebars
- Rear sets
- Gas Caps and Lids
- Pre Load Adjusters
- Exhausts
- Braketech Race Rotors
- BST Carbon Fibre Wheels
- Clearance Stock
- Accessories
- Tyres
- RK Race Chains
- Sprockets
- Carb Vent catch can
- Sliders
- Elf Moto Lubricants
- Batteries
- Brake Rotors
- Tyre Warmers
- Clutch Plates
- Clutch Lever
- Head Lift Stand
- Rear Stand-Black
- Trailer Mate Stand+Locknuts-Black
- Ramp-Heavy Duty
- Tie Downs
- Hats
- T-shirts
Manufacture List
Contact Details
- Red-Mist
- P: 0425 604 630
All Products
RK 520 GXW PREMIUM CHAIN
Status - On Order Price - $225.00 inc GST
RK 520 GXW XW-RING CHAIN MAX 1000CC
The XW-ring is made of an advanced Nitrile Butadiene composite and features three contact lips and two convex outer stabilizers. This means three lubrication pools to protect against high speed abrasion, extreme heat build up, torsional flex and loss of lubricant. Nitrile Butadiene composite is oil and contaminant resistant, and the ?XW? seal design is compression and distortion resistant to provide the ultimate in efficiency and performance with absolutely no o-ring drag. The XW-ring provides the user with a 50% longer wear life than basic o-ring chains
AXIS Iron Rotors
Status - On Order Price - $0.00 inc GST
The all-new AXIS Design extreme performance rotors are here! Representing nearly two years of development in high technology braking systems. Although weight is virtually identical to our existing SuperLite full-floaters, the new design bristles with many new and innovative features making the all new patent pending AXIS Design substantially stronger and with much improved thermal transfer capabilities.
PRODUCT FEATURES:
* Patented AXIS Design - featuring Direct-Link? load transfer system
* 50% greater Tensile Strength and Fatigue Strength
* Ductile Iron (vs Gray Iron)
* CRYOGENIC treatment for material stress-reduction
* Improved thermal tranfer capabilities
* Reduced wear from shear forces - longer rotor life
* Carriers are premium grade billet aluminum bar - not stamped plate aluminum
* Hard-anodized to military grade specifications
POA
Axis Starblade
Status - On Order Price - $0.00 inc GST
BrakeTech USA is very pleased to announce the release of the long awaited, ultra-advanced technology Ceramic Matrix Composite brake rotors for the Motorcycle Industry. The AXIS/StarBlade? is the new and updated MKII version incorporating now de-classified Stealth Bomber Aircraft technology manufactured by Starfire Systems, this revolutionary material will change the way both top-level race teams and enthusiasts alike view their braking systems. The performance parameters in-total make all previous materials and systems dated by comparison, including the vaunted Carbon/carbon brakes. Designed to perform brilliantly with OE calipers as well as the Billet GP race-spec versions. This all-new composite material offers the best features of premium iron rotors with the incredible lightweight of carbon, and none of the Carbon/carbon foibles!
PRODUCT FEATURES:
* Patented AXIS Design - featuring Direct-Link? load transfer system
* Not thermally sensitive (will work great on the street)
* Ultra broad torque curve across a very wide thermal range
* Much longer lasting than C/c
* Much less expensive than C/c
* Great wet weather performance - unlike C/c
* Terrific feel and feedback at the lever
* Strong braking performance? ? We mean, Really strong: +.6 mu average friction with special Ferodo Racing brake pads
* Carriers are premium grade billet aluminum bar - not stamped plate aluminum
* Hard-anodized to military grade specifications
Brake Weight Comparison (Honda CBR-1000RR, ‘04-05)
* Honda OE 310mm Stainless: 3lbs 4.4oz @ 5mm thick [1486grams]
* BrakeTech 310mm AXIS/Iron: ? 2lbs 15.0oz @ 5mm thick [1332grams]
* BrakeTech 310mm AXIS/Starblade? CMC: ? 1lb 5.6oz @ 5mm thick [612grams]
Brake Weight Stats for 6mm thick Narrow-Band Superbike
* BrakeTech SBK 320mm AXIS/Starblade? CMC: 1lb 8.7oz @ 6.0mm thick [700grams]
* Brembo SBK 320mm Steel: 3lbs 11.4oz @ 6.0mm thick [1684grams]
POA
AXIS/Cobra Stainless Rotors
Status - On Order Price - $0.00 inc GST
BrakeTech USA is pleased to announce the all-new AXIS/Cobra series extreme performance stainless steel rotors! The new Cobra full-floaters feature premium heat-treated 420 stainless steel in a newly optimized petal design that offers style and performance with none of the downside associated with conventional contoured type rotors. The patented AXIS Design bristles with many new and innovative features making them substantially stronger and with much improved thermal transfer capabilities and any other competitive brand.
PRODUCT FEATURES:
* Patented AXIS Design - featuring Direct-Link? load transfer system
* CRYOGENIC treatment for material stress-reduction
* Improved thermal tranfer capabilities
* Reduced wear from shear forces - longer rotor life
* Carriers are premium grade billet aluminum bar - not stamped plate aluminum
* Hard-anodized to military grade specifications
POA
Ballistic Clutch Plates
Status - In Stock Price - $120.00 inc GST
Save money with Ballistic Drag Racing’s own clutch packs. Made from cork fibre these plates are stronger and more reliable than other brands. OEM Replacement. Steels also available.
Available for all makes and models- call for availability and pricing. Models currently in stock include;
BAL1001- Kawasaki GPZ 1100J - $85.00
BAL1002- Kawasaki Z900/Z1000- $85.00
BAL1003- Suzuki GSX 1100/ 1150- $85.00
BAL1004- Busa GSX 1300R 99- 07- $120.00
BAL1004/0- Busa GSX 1300R Race 99-07- $120.00
BAL1005- Suzuki GSXR1000- $120.00
BAL1006- Kawasaki ZX12 99-02- $120.00
BAL1007- Honda CB750 K6/K7/F2 76-78- $85.00
BAL1008- Honda CB750/ 4 79-82- $85.00
BAL1009- Honda CB750 F/F1 76-77- $85.00
BAL1012- Suzuki GSXR750 2000 - $120.00
BAL1013- Suzuki GSXR1100 86-88- $120.00
BAL1014- Kawasaki ZX14- $120.00
BAL1015- Yamaha FJ 1200- $85.00
BAL1016- Honda ST1100 91-01- $120.00
BAL1017- Yamaha YZF Thunder race- $120.00
BAL1018- Suzuki GSX750 80-86-$85.00
As used by Robert Cassar, Australian Comp bike champion Kevin Gummow and Peter Bartlett. Glenn Wooster, David Hall and Dan Rabnot in Pro Stock Bike and a number of Period 5 road racers. Also used by a number of racers in the USA including 48 time National Champion Bruce Sauer.
Brembo Brake Rotors
Status - In Stock Price - $695.00 inc GST
THIS IS A BRAND NEW SET GENUINE BREMBO FRONT BRAKE ROTORS . THIS ROTOR IS 320MM IN DIAMETER. THE CARRIER IS MADE OF CNC BILLET ALUMINUM AND THE BRAKING ROTOR IS MADE OF HIGH-STRENGTH STAINLESS STEEL.
MADE IN ITALY
IT WILL FIT DUCATI 748, 748S,916, 996, 996S AND OTHER DUCATI’S
WE ARE ABLE TO SUPPLY A MAJORITY OF BREMBO PRODUCTS INCLUDING HARD TO FIND PARTS.
BST HIGH PERFORMANCE AND DRAG RACING WHEELS
Status - On Order Price - $0.00 inc GST
Specially configured for high performance these wheels present with all the normal brilliant features of the BST Carbon Fibre wheels but come in a slightly different range of sizes:
Fronts 2.5” X 18”
Rear 6.25” X 17” OR 6.625” X 17”
Due to their unique applications these wheels are generally not carried in stock but can be ordered and generally delivered within 5 weeks.
BST SPORTBIKE WHEELS FOR USE ON STREET AND TRACK (BLACK DIAMOND)
Status - On Order Price - $0.00 inc GST
BST offers a wheel choice for a vast range of motorbikes from all the modern Japanese sportsbikes to Aprilia, BMW, Bimoto, MV Augusta, Ducati and Triumph.
The wheel patterns (depending on application) may be seven straight spokes (Black Panther or Black Mamba) or five swept back/slanted spokes (Black Diamond)
Generally the wheel size is the same as the original but there are various different options to choose from.
Technical information such as weights and test results are conveniently displayed on the manufacturers web site: www.blackstonetek.com
BST SPORTBIKE WHEELS FOR USE ON STREET AND TRACK (BLACK DIAMOND)
Status - On Order Price - $0.00 inc GST
BST offers a wheel choice for a vast range of motorbikes from all the modern Japanese sportsbikes to Aprilia, BMW, Bimoto, MV Augusta, Ducati and Triumph.
Each wheel has a unique serial number and undergoes rigorous quality inspections.
Fitting is straight forward, only requiring you to place the original or new discs/brake rotors onto the BST wheels. No special precautions are required to fit tyres and the clear coat on the rim ends at the tyre bead so there is no risk of chipping.
We provide a Driven Racing alloy sprocket of your choice which is purposely manufactured for the BST wheels. Different sprocket combinations are readily available from RED-MIST.
Every effort is made to have a range of wheels in stock but due to the popularity of this product this is sometimes not possible and back orders can take up to 5 weeks for delivery.
BST SPORTBIKE WHEELS FOR USE ON STREET AND TRACK (BLACK MAMBA)
Status - On Order Price - $0.00 inc GST
BST offers a wheel choice for a vast range of motorbikes from all the modern Japanese sportsbikes to Aprilia, BMW, Bimoto, MV Augusta, Ducati and Triumph.
The wheel patterns (depending on application) may be seven straight spokes (Black Panther or Black Mamba) or five swept back/slanted spokes (Black Diamond)
Generally the wheel size is the same as the original but there are various different options to choose from.
Technical information such as weights and test results are conveniently displayed on the manufacturers web site: www.blackstonetek.com
BST SPORTBIKE WHEELS FOR USE ON STREET AND TRACK (BLACK MAMBA)
Status - On Order Price - $0.00 inc GST
BST offers a wheel choice for a vast range of motorbikes from all the modern Japanese sportsbikes to Aprilia, BMW, Bimoto, MV Augusta, Ducati and Triumph.
A set of BST wheels can be ordered individually.
Each wheel has a unique serial number and undergoes rigorous quality inspections.
Fitting is straight forward, only requiring you to place the original or new discs/brake rotors onto the BST wheels. No special precautions are required to fit tyres and the clear coat on the rim ends at the tyre bead so there is no risk of chipping.
RED-MIST provides a Driven Racing alloy sprocket of your choice which is purposely manufactured for the BST wheels. Different sprocket combinations are readily available from RED-MIST.
Every effort is made to have a range of wheels in stock but due to the popularity of this product this is sometimes not possible and back orders can take up to 5 weeks for delivery.
Please contact RED-MIST to discuss your options.
BST V-ROD, AMERICAN V AND CUSTOM MACHINE WHEELS
Status - On Order Price - $0.00 inc GST
Harley Davidson V-Rod wheels are available in a 5.5” or 8.5” rear. They are a direct bolt on replacement for the original wheels and the 5.5” are generally in stock.
For the custom build bikes there are 5 schematic diagrams that will need to be applied for the various build combinations. Please enquire for more info and pricing.
Various sizes are available all featuring the normal exceptional BST quality.
Front: 2.5” X 21” 3.5” X 18” 3” X 19”
Rear: 5.5” X 18” 8.5” X 18” 3.5” X 18”
Some classic examples of these wheels can be seen on the Revolution Speed site
CLICK
BST WHEELS FOR BMW (BLACK PANTHER)
Status - On Order Price - $0.00 inc GST
BST’s new 7 spoke design is now available for the hugely popular BMW range of motorcycles. The Black Panther wheels feature 7 slender spokes, and shows off the elegant brake carrier. As always, the MOI of the BST wheels is evident with the BST BMW wheels, increasing performance like no other after-market addition to your motorcycle can.
The BST wheels are strong enough for these sports tour bikes with the extra weight they typically carry.
Available now, the first production run is already sold out, so get your orders in soon!
Carb Vent Catch Can
Status - On Order Price - $83.50 inc GST
Carb vent kit / catch can. Make your bike race ready with this easy kit. Route all your carb vent lines into this system for a clean look. Has breather tube for routing under fuel tank + comes with anodized plug for quick draining of system. The large lower tube acts as the catch tank. Anodized in 5 different colors to choose from. Made in the USA.
Carbon Fibre Handle Bars and Clip Ons With S/Steel Bolt Set
Status - On Order Price - $292.00 inc GST
Carbon Fiber Handle Bar with Clip Ons and S/Steel Bolts Set. The Clip ons are CNC Milled out of high quality aircraft grade 6082 T6 aluminium (slightly higher grade than 6061 T6). The carbon fibre bars are substantially lighter and about 10 times stronger than the stock bars. Made from preimpregnated carbon fibre and clear coated results in a superb finish with a great carbon look. The bars are standard 7/8 size. The clip ons come in a range of sizes 41mm, 43mm. 48mm, 50mm, 51mm, 53mm and either black or natural anodised colours. They are easy to fit (instructions included) and replacement bars are available.
The set is fully adjustable and can be moved to suit any riding style
Clip Ons and alloy bars
Status - On Order Price - $235.00 inc GST
The clip ons are CNC Milled out of high quality aircraft grade 6082 T6 aluminium (slightly higher grade than 6061 T6)and come in a range of sizes 41mm, 43mm. 48mm, 50mm, 51mm, 53mm, and either black or natural anodised colours. They are easy to fit and replacement bars are available. S/Steel mounting cap screws are included.
Once fitted these attractive clip ons will provide you with fully adjustable positioning handle bars, higher, lower, forward or back at a fraction of the cost of original parts and can be tailored to suit any riding style.
We carry a large stock of 50mm, 51mm and 53mm as these fit most of the newer models. 43mm fit the older models without USD forks and are normally ordered in, delivery around 2 weeks.
DRIVEN ALUMITECH GRIPS WITH ALUMINUM COLLARS
Status - On Order Price - $77.99 inc GST
NEW DRIVEN ALUMITECH GRIPS WITH ALUMINUM COLLARS OPEN END ONLY FITS ALL BIKES
DRIVEN BAR END WEIGHTS
Status - On Order Price - $32.95 inc GST
DRIVEN Bar end weights are machined out of 6061 aluminum
and anodized in 5 brilliant colors, red, blue, black, gold, silver.
They use a rubber compression sleeve to fit inside your handlebar leaving no visible hardware to give them a clean finished look.
Bar end weights will fit most OEM applications and all
aftermarket clip-on bars.
DRIVEN CONTROL BARS
Status - On Order Price - $69.99 inc GST
DRIVEN is proud to offer our superior performance handlebars. Our thicker bar is called
Meteor and our thinner bar is called Velocity. Both bars feature alloy construction for
reduced weight and increased strength and have engineered flex properties to improve
longevity and reduce rider fatigue. The surface is shotpeened and then anodized for
protection from corrosion. There are laser etched alignment marks to ease installation
and they are available in gold, red, blue, black and gun metal. A bar pad is included at
no additional cost. From: $69.99 to $129.00
DRIVEN CONTROL BARS STREET AND RACE
Status - On Order Price - $292.00 inc GST
DRIVEN always strives to be innovative as well as functional. With that in mind we designed
these racing clip on bars to achieve the best of both worlds. The bar clamps are formed
from 7075T6 aluminum billet and then machined for reduced weight and enhanced
appearance. Fixed in a 7 degree angle for clearance and racing crouch, 2 sets of
pinch bolts secure the clamps to the fork and the adjustable bars to the clamp.
DRIVEN clip on bars are available in sizes 41, 43, 45, 48, 50 as well as 48/50 for GSX-R
600/750 06-08 applications. The bars are replaceable and can be ordered separately. They
come with black Delrin bar ends. Colored bar ends are available as well and must be ordered
separately.
DRIVEN GRIPPY GRIPS (DIAMOND)
Status - On Order Price - $21.90 inc GST
DRIVEN’s unique grips are manufactured to our specifications using Kraton gel
inside a PVC outer shell. This construction dramatically reduces vibration and arm
pump while retaining its shape and appearance. They are available for specific
applications as well as OEM replacement and come in many colors and patterns
for use on street, racing, motocross, supermoto or ATV.
DRIVEN HALF WAFFLE MX GRIPS
Status - On Order Price - $21.90 inc GST
DRIVEN’s unique grips are manufactured to our specifications using Kraton gel
inside a PVC outer shell. This construction dramatically reduces vibration and arm
pump while retaining its shape and appearance. They are available for specific
applications as well as OEM replacement and come in many colors and patterns
for use on street, racing, motocross, supermoto or ATV.
DRIVEN SKULLY GRIPS
Status - On Order Price - $21.90 inc GST
DRIVEN’s unique grips are manufactured to our specifications using Kraton gel
inside a PVC outer shell. This construction dramatically reduces vibration and arm
pump while retaining its shape and appearance. They are available for specific
applications as well as OEM replacement and come in many colors and patterns
for use on street, racing, motocross, supermoto or ATV.
DRIVEN SPROCKETS.
Status - On Order Price - $110.00 inc GST
Most aluminum rear sprockets start out as blank discs punched out of sheets of heat-treated
7075-T6 aluminum. The quality of these aluminum sheets vary among manufacturers and
countries. DRIVEN uses only the finest aluminum available in the world. We shape the tooth
profile on a hobbing machine, which guarantees the perfect shape and fit for the least amount
of friction and subsequent wear when mated to the chain. The final color anodizing further
increases strength and durability as well as adding a personalized characteristic. Throughout
the entire process the disc undergoes rigorous quality control insuring each individual sprocket
is perfectly flat and concentric. This guarantees the consumer the finest product available. Our
front sprockets are made of case hardened, C45 chromoly steel, zinc plated for strength and
durability and drilled for mass and weight reduction.
From $110.00
DUCATI & MV AUGUSTA AXLE NUT
Status - In Stock Price - $46.00 inc GST
SIX SIDED: Silver and Black
TWELVE SIDED: Silver and Gold
DUCATI 1098 /MV AUGUSTA GAS CAP BASES AND LIDS
Status - On Order Price - $105.00 inc GST
With a screw on and off lid there is no need for keys and weighs considerably less than the original.
CNC Milled out of high quality aircraft grade 6082 T6 aluminum this product is easy to fit and comes with all the necessary fittings.
The colours in stock are black and gold
DUCATI 749 - 999 RACE SHIFT ADJUSTABLE REAR SET
Status - On Order Price - $644.00 inc GST
CNC milled out of high quality aircraft grade 6082 T6 aluminium Available in black and natural anodised colours. The set includes all the replacement parts and fixtures. The toe pegs are purposely finished in a smooth surface on the gear side and a slightly rougher finish on the brake side. Replacement toe pegs are available to order separately. Slightly lighter than the standard 748/999 the Race set allows for a reverse/GP shift function. Some riders find it easier when tucked down on the fast sections to bang down on the gear pedal to go up the gear box. It works and is a very comfortable approach when going quick on the track.
The set is very easy to fit and comes with instructions.
RS-DUC-005
DUCATI 749 - 999 STANDARD ADJUSTABLE REARSET
Status - On Order Price - $644.00 inc GST
Very similar looking and of the same high quality as the Race sets but without the option of reverse shift. Not a bad idea if you also own another bike without reverse shift. Things get confusing with two different shift patterns. Replacement parts are readily available and we stock anodised black and natural. Very easy to fit with all fixtures included and instructions. CNC milled out of high quality aircraft grade 6082 T6 aluminium with the toe pegs purposely finished in a smooth surface on the gear side and a slightly rougher finish on the brake side.
A stronger and lighter attractive alternative to the original rear sets.
RS-DUC-004
Elf Moto 4 dx Ratio 20W-50 (4 Litres )
Status - In Stock Price - $42.95 inc GST
Appropriate to any 4-stroke motorcycle engines.
This rational lubricant lubricates all standard engines. Its improved functionality
protects the engine under all daily urban traffic and rural conditions.
Compatible with catalytic converters. The drain intervals recommended by the
manufacturers and the minimum viscosity requirements must be compiled with.
This lubricant is compatible with unleaded fuels. International Specifications �� API SG �� JASO MA.
Elf Moto 4hp eco 10W-40 (4 litres)
Status - In Stock Price - $59.95 inc GST
New generation synthetic based formula incorporates a clutch anti slip technology and gives superior performance. You will enjoy a more comfortable ride thanks to easier revving and a visible reduction in smoke emissions when starting
- Semi- synthetic
- 10W40
- JASO MA
- API SG
- Anti clutch slippage
- Superior friction properties
- Smoke reduction system
Elf Moto 4xt tech full synthetic 10W-50 (4 litres)
Status - In Stock Price - $79.95 inc GST
New design 100% synthetic lubricant for 4 stroke engines. For high endurance performance and power for your engine. Moto 4 XT tech is a concentration of technology for optimum cleanliness of all parts of the engine and smooth and slick gear changes.
- 100% synthetic base
- 10W50
- 100% PAO
- JASO MA
- API SG
- Anti clutch slippage
- Very high endurance performance
Elf Moto Chain Lube
Status - In Stock Price - $23.95 inc GST
Very high performance grease for motorcycle chains. Its formula was specially developed to provide optimum lubrication under the harshest running conditions.Successfully tested at Moto GP.
FAQ BST SUPERMOTARD WHEELS
Status - On Order Price - $0.00 inc GST
Q: Why are these BST carbon Supermoto wheels so much faster than the usual Supermoto wheels?
A: The reason for that can be found in the combination of saving weight, minimizing the moment of inertia, reducing the gyroscopic effect and the radius of gyration.
*
Weightsaving:
It is a known fact that saving weight on the UNsprung mass ( wheels, brakediscs etc) offers more performance advantage than saving weight on the sprung (any other ?non rotating?) mass.
A known formula in racing is the ?factor of eight? ie it requires 32 kgs ?normal? weight saving to obtain similar performance advantage than saving 4kgs of weight on a set of wheels will provide !
Our wheels show weight advantages of up to 5 kgs a set ! Do your math ...
*
Moment of inertia:
The energy required to start a wheel turning increases with the weight of the wheel, which applies also to stopping the wheel from turning. It may be clear that a low moment of enertia is of great advantage to accelaration and braking. That?s why it feels like you have more HP accelerating with our wheels on .
*
Gyroscopic effect:
Saving weight on a wheel means less gyroscopic effect! It is difficult to make a spinning wheel change direction. The lighter the wheel the easier itis to change direction. Therefore the lightweight Goldspeed BST carbon wheels have immense impact on the handling of the bike. Easy to flick from side to side and unbelieveable ?tight? lines are finally possible .
*
Radius of Gyration:
The total weight is spread over the complete wheel. It does matter, however, where the weight is located. The closer the weight turns around the centre of the wheel the better the handling becomes. Almost 80% of the total weight of our wheels is located around the hub section. An extremely good radius of gyration.
*
Combination of characteristics:
It might be clear that one charateristic reinforces the other one, and it is the combination of the above that provide the performance advantage that these wheels do.
Once a rider is used to the wheels and knows how to benefit from all these advantages, you will be able to improve laptimes up to 1 sec. faster !
Besides this, many riders confirm an increase of grip. This is no doubt the result of the reduced centrifugal force when ?leaned in?. Also the stiffness has its advantage. An extremely ?flexing? wheel will result in a constantly changing Tyre contact patch, resulting in less predictable handling.
Q: Why carbon fibre wheels?
A: Looking at the alternative: of all metals, magnesium has the highest strength to weight ratio, beaten only by carbon fibre. Besides this, magnesium is subject to fatigue and will lead to serious cracking if not replaced in time. Generally it?s accepted that magnesium racing wheels are to be replaced at least every season ! Too much disadvantages in our opinion to use this material for developing ultralight Supermoto competition wheels.
Carbon fibre is not subject to fatigue at all and will last a lifetime. And above all, the latest knowledge and innovation on the way of constructing and the use of carbon materials, made it possible to create ultralight wheels for the even highly demanding Supermoto racing and still guarantee the required benefits.
It was never the question IF we could build carbon fibre Supermoto competition wheels, but a question of HOW to build them maintaining the perfect balance between performance advantage and rider safety!
Q: Can the BST carbon wheels be used tubeless ?
A: Yes they can ! Our carbon wheels have been tested to the extreme, tubeless ! Even exhausting destructive tests (tubeless jumping / landing on the hardest MX tracks throughout Europe) did not cause any problems. All, by now literally abused, test wheels are still used weekly in training and racing !
Fly Racing Quick Adjust Clutch Lever Assembly
Status - In Stock Price - $49.95 inc GST
Universal Quick Adjust Clutch Lever Assembly to suit- HondaCR,KawasakiKX,SuzukiRM,YamahaYZ.
Quick adjust with spring-loaded detents lets you precisely adjust clutch during the race.
Forged aluminum for lasting durability.
Gorilla Zilla Clipons and Alloy Bars.
Status - On Order Price - $235.00 inc GST
The clip ons are CNC Milled out of high quality aircraft grade 6082 T6 aluminium (slightly higher grade than 6061 T6)and come in a range of sizes 41mm, 43mm. 48mm, 50mm, 51mm, 53mm, and either black or natural anodised colours. They are easy to fit and replacement bars are available. S/Steel mounting cap screws are included.
Once fitted these attractive clip ons will provide you with fully adjustable positioning handle bars, higher, lower, forward or back at a fraction of the cost of original parts and can be tailored to suit any riding style.
We carry a large stock of 50mm, 51mm and 53mm as these fit most of the newer models. 43mm fit the older models without USD forks and are normally ordered in, delivery around 2 weeks.
HANDLEBARS
Status - On Order Price - $25.00 inc GST
We provide three different types of Handlebars, which are all compatible with our clip ons.
They are alloy which come in anodised black or natural, very strong and much lighter than stock bars.($25.00)
Or Carbon fibre, pre impregnated and clear coated. Exceptionally strong and very light. ($82.00)
The ends are finished with a tough rounded plastic end cap.
A cheaper and superior replacement for the original bars.
Please be aware that if your steering dampner mount to the underneath of the clip on you will need an extra fork leg mount, Graves Engineering supply a very good product.
Headlift Stand- Black
Status - In Stock Price - $135.00 inc GST
HEADLIFT STAND-BLACK
Suits most sports bikes
Solid 32mm steel tubing
One of the most popular & well tried stands around
Easy & safe to use
Comes with 5 pins (sizes:13 /15 /16.5 / 17 /18mm)
Additional pin sizes are $14.95 extra each (19/20/21/23/27mm)
The Head Lifter picks the front of the bike up using the hole in the bottom of the steering stem. Allows the removal of the wheel and forks. Note: Some bikes may have parts which impede access to the steering stem hole. Others may not have a hole at all
Available in red, black, silver, green or blue powder coating
Pictures show item assembled on R1
All Kaneg Products Come With A 12 Month Warranty
HONDA CRF 250R 2011 ALLOY/CARBON RACER SERIES FULL SYSTEM. ALLOY- $645.00/CARBON-$745.00.
Status - In Stock Price - $745.00 inc GST
PROUDLY MADE IN THE USA.
■CRF150R 2007-2009
■CRF250R 2004-2005
■CRF250R 2006-2009
■CRF250R 2010
■CRF250R 2011
■CRF450R 2005
■CRF450R 2006-2008
■CRF450R 2009-2010
■CRF450R 2011
■TRX400EX All Years
■TRX450R 2006-2011
■TRX450R All Years
POSTAGE-$40.00 AUSTRALIA WIDE.
HONDA CRF 450R 2011 CARBON RACER SERIES FULL SYSTEM.ALLOY-$645.00/CARBON $745.00.
Status - In Stock Price - $745.00 inc GST
PROUDLY MADE IN THE USA.
POSTAGE $40.00 AUSTRALIA WIDE.
HUSQVARNA TC 250/310 2010-2011 RACER SERIES FULL SYSTEM.
Status - On Order Price - $645.00 inc GST
PROUDLY MADE IN THE USA.
POSTAGE $40.00 AUSTRALIA WIDE.
Kaneg Tie Downs
Status - In Stock Price - $25.00 inc GST
HEAVY DUTY
Motorbike Tie Downs
1 Pair (2 Straps)
Length: 2.3mtrs Width: 25mm
S Hook: 115mm length x 10mm Plastic Coated Steel
Heavy Duty Spring Loaded Camlock Buckle
Snap Hook: 100mm length x 50mm width x 10mm thick
100% Triple Layered Polyester Webbing
S-Hook Attaches to Loop to Protect Your Bike Frame
TESTED TO 500KGS / RATED @ 250KGS
Guaranteed To Last.
Kaneg Tyre Warmers 120/160 Non-Digital
Status - On Order Price - $399.00 inc GST
Dual Indicators - Red for Heating & Green For Ready
Tested and developed in Australian conditions by factory riders
Capable of being powered by a 1KVA portable generator
Constructed using special fire retardant Aramid fiber, heat retaining nomex and kevlar insulation sheet, dirt- proof and acid-proof surface assures long life
The heating elements cover 43% of the tyre surface and is up to 20% more powerful than leading competitors to ensure a fast heating cycle ( 30 minutes subject to atmosheric conditions )
Self fitting elasticised sides offer a snug fit and uniform distribution
Velcro Fastening
Kaneg?s warmers are 450W for the front tyre and 550W for the rear.
The three dimensional pre-shaped form allows quicker distribution of warmth to the sides of the tyres
Available in RED exactly as pictured
Kaneg Tyre Warmers Digital 120/190
Status - In Stock Price - $450.00 inc GST
Tested and developed in Australian conditions by factory riders
Fully adjustable digital temperature control box allows settings for slicks, wets,intermediate tyres of various manufacturers recommendations
Easy to read big LED temperature indicator - no more guess work
Capable of being powered by a 1KVA portable generator
Constructed using special fire retardant Aramid fiber, heat retaining nomex and kevlar insulation sheet, dirt- proof and acid-proof surface assures long life
The heating elements cover 43% of the tyre surface and is up to 20% more powerful than leading competitors to ensure a fast heating cycle ( 30 minutes subject to atmosheric conditions )Self fitting elasticised sides offer a snug fit and uniform distribution
Kaneg’s warmers are 450W for the front tyre and 550W for the rear.
The three dimensional pre-shaped form allows quicker distribution of warmth to the sides of the tyres
12 month replacement warranty (subject to normal use and tear and wear conditions)
Used in World Superbikes, Moto GP, European Superstock Championships and Australian Superbikes
Available in black exactly as pictured
Kaneg Tyre Warmers Non Digital 120/190
Status - In Stock Price - $399.00 inc GST
Dual Indicators - Red for Heating & Green For Ready
Tested and developed in Australian conditions by factory riders
Capable of being powered by a 1KVA portable generator
Constructed using special fire retardant Aramid fiber, heat retaining nomex and kevlar insulation sheet, dirt- proof and acid-proof surface assures long life
The heating elements cover 43% of the tyre surface and is up to 20% more powerful than leading competitors to ensure a fast heating cycle ( 30 minutes subject to atmosheric conditions )
Self fitting elasticised sides offer a snug fit and uniform distribution
Velcro Fastening
Kaneg’s warmers are 450W for the front tyre and 550W for the rear.
The three dimensional pre-shaped form allows quicker distribution of warmth to the sides of the tyres
Available in BLUE exactly as pictured
KAWASAKI KX 450F 2009-2011 RACER SERIES FULL SYSTEM.
Status - On Order Price - $645.00 inc GST
PROUDLY MADE IN THE USA.
■KFX400 2003-2008
■KLX400R 2003-2006
■KLX450F 2008-2011
■KX250F 2004-2008
■KX250F 2009-2011
■KX450F 2006-2008
■KX450F 2009-2011
POSTAGE $40.00 AUSTRALIA WIDE.
KTM SX 250F 2011 RACER SERIES FULL SYSTEM.
Status - On Order Price - $645.00 inc GST
PROUDLY MADE IN THE USA.
■SX250F 2007-2010
■SX350F 2011
■SX250F 2011
■SX450/525F 2005-2006
■SX450/525F 2007-2011
■450525xc-2007-2009
POSTAGE $40.00 AUSTRALIA WIDE.
MAXXIS SUPERMOTARD TYRES (SET)
Status - In Stock Price - $200.00 inc GST
SUPERMOTARD
The Presa M6109 is specifically designed for your Supermoto race needs and is available in two compounds. The Kevlar belted radial construction provides excellent stability, while the slick tread design enhances tire grip and may be modified according to track conditions.
* Tire is available in medium and soft compounds
* Slick pattern design can be modified according to track conditions
* Specially formulated tread compound offers superior traction and control
* Kevlar belted construction enhances performance and maintains tire uniformity
* Designed specifically for Supermotard competition
* Medium compound - SL-2
* Soft compound - SL-1
PRE-LOAD ADJUSTER 14mm Hex or Flat
Status - On Order Price - $38.00 inc GST
Easy to use finger control adjusters which fit over original adjuster making it super easy to fine tune your fork preload without having to scratch around for the correct spanner.
CNC Milled out of high quality aircraft grade 6082 T6 aluminum (slightly higher grade than 6061 T6). Available in a variety of anodised colours. Blue, gold, natural and black
The original pre load adjuster will be either a hexagonal or flat configuration and 14mm in size.
Please specify which you require
Race kit 4 sliders and 1 hex nut
Status - On Order Price - $56.00 inc GST
4 spare sliders and 1 extra CNC machined aluminum nut. Your choice of 1 ?“or 1 1/4” diameter slider. CNC machined from black delrin. These sliders will fit every axle slider or spool slider we have ever made. Made in the USA.
Ramp-Heavy Duty
Status - In Stock Price - $199.00 inc GST
HEAVY DUTY 5 CHANNEL LOADING RAMP
Why would you trust your pride and joy on a ramp that is just any old ramp strong enough to carry its weight?
This heavy duty folding ramp is light weight, all aluminium construction.
It has a flat plate surface with raised edges for traction even in the mud, rain or snow. This ramp is lightweight and easy to operate and fold in half for compact storage and transport.
There is an adjustable safety strap included that conects from the top of the ramp down to the bumper or trailer hitch to keep the ramp in place.
5 rubber coated fingers per runner protect your vehicles paint.
Kaneg loading ramp is a high quality heavy duty piece of equipment that anyone at the track or simply someone needing to transport a bike, can use with extreme confidence.
ALL KANEG PRODUCTS COME WITH A 12 MONTHS WARRANTY
Rear Stand-Black
Status - In Stock Price - $95.00 inc GST
Black Rear Stand
Pro racer stand with 4 wheels
Proven by market for over 5 years
Strongest stand on the market - 32 mm steel rod
6kg in flat box for easy transportation.
Safe & easy to use
Powder coated black
Also available in red, green, blue or silver
Wide enough to lift HONDA CBR600 and CBR1000
We can supply flat platforms for your rear stand if you haven?t got provisions for spools on your bike, please let us know prior to or at the time of payment, so we can include when dispatching
ALL KANEG PRODUCTS COME WITH A 12 MONTH WARRANTY
Rocket Logo Black Hat
Status - In Stock Price - $24.95 inc GST
Rocket Logo Black Hat.
Available Sizes-Medium or Large.
Rocket Logo Black T-shirt.
Status - In Stock Price - $24.95 inc GST
Rocket Logo Black T-Shirt.
Available Sizes-Small/Medium/XL/XXL.
SSB GEL Batteries
Status - On Order Price - $0.00 inc GST
SSB POWERSPORT gel batteries are completely sealed and ready-to-use out of the box! No need to mess with water and acid.
The lack of free electrolyte reduces resistance and produces 25% more cranking amperage than the competition.
The liquid-free design allows you to mount it almost anyway you want (but not upside down)
The 2% monthly self-discharge rate means your bike can sit for extended periods without constant monitoring or recharging.
THIS IS A FULLY SEALED MAINTENANCE FREE HIGH PERFORMANCE BATTERY… USES THE LATEST AGM GEL TECHNOLOGY....MOST ADVANCED ON THE MARKET!
To suit: CBR/R1/GSXR/ZX10
Contact for price and availability.
SUZUKI RMZ 250 2010-2011 RACER SERIES FULL SYSTEM.
Status - On Order Price - $645.00 inc GST
PROUDLY MADE IN THE USA.
■RMZ450 2008-2011
■RMZ450 2005-2007
■RMZ250 2010-2011
■RMZ250 2008-2009
■RMZ250 2007
■RMZ250 2004-2006
■RMX450Z 2010-2011
■LTR400 2006-2011
■LTZ400 2003-2011
■DRZ400 2000-2007
■DRZ400S 2000-2011
■DRZ400SM 2005-2011
POSTAGE $40.00 AUSTRALIA WIDE.
Trailer Mate Stand+Locknuts-Black
Status - In Stock Price - $189.00 inc GST
TRAILERMATE
The Kaneg trailermate is designed for securing motorcycles & scooters upright with 16” to 19” wheels. The Kaneg Trailermate is great for transporting your bike or performing maintenance or storage, but also feels right at home on the track.
The trailermate incorporates a swivelling cradle with movable and intertwining teeth to allow easy entrance and removal. Once the motocycle wheel is in the chock the Kaneg Trailermate can be locked down by attaching the hook lever. Once locked, the Kaneg Trailermate keeps your motorcycle up-right on four thick rubber stops that provide a tenancious grip on many surfaces.
The Kaneg Trailermate can be used as a free standing floor stand for us in the garage, track or it can be mounted to any flat surface. Mounting hardware not included.
The Kaneg Trailermate has a thick black or red powder coating for a lasting finish that wont chip or fade. To switch the usable dimensions from 16” to 19” simply pull the top post pin and slide the front stop to the next position, its that simple.
The Kaneg Trailermate weighs 11.5kg, width 500mm, length 600mm and height 350mm.
Once you’ve used the Kaneg Trailermate, you’ll wonder how you got along without it!
LOCK NUT KIT
Set of 2 Nuts
Hardened Steel
10mm Bolts
Can be used to easilly attach our Trailer Mate to your Ute/Trailer/Van etc
Also used to insert other tie down points in your transport vehicle
TRIPLE TREE BAR CLAMP KIT
Status - On Order Price - $54.95 inc GST
Changing over from a thin bar to the thicker Driven Meteor bars- then you will need a set of these.
The diameter on the mounting section of the Meteor bars is 29mm
YAMAHA YZ 450 F 2010-2011 ALLOY/ CARBON RACER FULL SYSTEM.ALLOY- $645.00/CARBON- $745.00 (CARBON IN STOCK)
Status - In Stock Price - $745.00 inc GST
PROUDLY MADE IN THE USA.
■YZ250F 2003-2005
■YZ250F 2006-2009
■YZ250F 2010-2011
■YZ450F 2003-2005
■YZ450F 2006-2009
■YZ450F 2010-2011
■WR250F 2003-2006
■WR250F 2007-2011
■WR450F 2003-2006
■WR450F 2007-2011
■Raptor 660 2001-2006
POSTAGE $40.00 AUSTRALIA WIDE
Rocket Exhaust systems are dyno and track tested to enhance the entire powerband. Healthy increases in bottom, mid and top rpm range can be expected. We aim to lengthen the useable Power-range.
Thin-wall stainless steel header and mid-pipe.
Lightweight 6061 aluminum or optional super lightweight carbon fiber.
USDA Forest Service approved spark arrester (optional).
Most applications available as a full system and or slip-on.
End caps come in matching bike colors, black and polished.
The carbon fiber racer series is warranted for three months from the purchase-date against manufacturers defects. This product is intended for motocross application, the packing needs to be serviced every six to eight hours in order to protect the carbon fiber from excessive heat. Rocket Exhaust, will not warranty damage to the muffler caused by excessive heat as a result of not repacking the muffler. Service intervals for repacking the muffler vary greatly depending on riding ability and riding style.