Contact Details

Red-Mist
P: 0425 604 630
 

Facebook

 

Motorcycle Starter Roller

EasyStarter - A portable, safe and easy way to start Motorcycles.
EasyStarter allows the quick and safe starting of motorcycles, both Race and Touring bikes, in the the workshop or at the track.
EasyStarter duplicates the action of push-starting a bike by spinning the rear wheel up to a suitable speed. On releasing the clutch with the bike in gear, the engine is induced to start.
Operation -
1. Set up the EasyStarter on a suitable area of level ground behind the motorcycle.
2. Lower the ramp and position the starting switch in a suitable position on the side that suits you.
3. Plug the EasyStarter into an appropriate 240 V power source.
4. Back the motorcycle onto the EasyStarter ensuring the rear wheel is square to the rollers, central between the side-plates and that the front wheel is directly in line.
5. Sit astride the motorcycle and apply the front brake.
6. Select second gear (or the gear you would use if push-starting).
7. Turn on the motorcycle ignition switch, fuel levers, choke etc as appropriate.
8. Pull in the clutch lever.
9. Sit firmly on the seat and operate the EasyStarter operating switch with the heel. Make sure you let it get to full revs before dropping the clutch.
10. With the rear wheel spinning, let out the clutch to start the engine.
11. With the engine running, select neutral or pull in the clutch lever.
12. Release the EasyStarter operating switch.
13. Push the motorcycle off the EasyStarter.
Dimensions:
450mm (W) x 425mm (L) x 140mm (H)
Approx. Weight: 14 kg
2.4 KW / 240V
Standard Postage - $55.00 Australia Wide
Melbourne Postage -$10.00
Can organise delivery to any Track in Victoria.


  
 

Other News Stories


Cairns Web Development By RJNewDesigns